T4W’s high performance closed system formulations SYN-CLEANE 874 and TD52 are producing striking results in the field.
Cleaning formulation, SYN-CLEANE 874, removes more iron during the cleaning and flushing stages, while also laying down a temporary corrosion protector.
Our highly concentrated corrosion inhibitor TD52, with its increased speed of passivation rate, is then used to immediately lay down a permanent protection layer in the system.
This unique chemical combination has given dissolved and total iron counts significantly below the BISRIA guidelines 100% of the time in the field.
Our customers have found the low dose products (0.5% for 874 & 0.2% for TD52) to be a very cost effective solution to the dissolved and total iron issues previously experienced when using competitors’ products.
In the three years we have been using these chemicals, a reflush has never been carried out.
When using competitors’ traditional closed system cleaners and standard nitrite/molybdate inhibitors, many of our customers were not achieving the required suppression of iron causing them, in some cases, to have to repeat the work carried out at their cost.
However, our customers have repeatedly achieved iron levels considerably below the maximum permitted in accordance with the latest BISRIA guidelines.
This is achieved chemically by a combination of high performing chealating components in the 874 alongside its temporary corrosion protection function which passivates the metal surfaces prior to the addition of the molybdate inhibitor in the form of TD52. The high strength molybdate product passivates metal surfaces extremely quickly which is the key to arresting the oxidation of metal surfaces between flushing and filling of the system.